Bright Diamonds Quilt Top Assembled

When you last saw this quilt (in 2015), it was scattered over the floor after it fell off my flannel sheet design board. I thought the cotton just didn't stick to the flannel, but I later realized the window was open and the breeze would get behind the flannel and flick it against the wall, effectively tossing off all of the blocks.

I got busy with work or whatever and put these blocks in a box and didn't take them out again until last week.

It being winter (and freakishly cold), I didn't think an open window would be a problem if I used the design wall. I laid out the blocks again, moved them around a little bit and ended with this:

The diamonds have to be sewn together in diagonal rows. It's not any harder really, but it does take a little more thought to make sure you don't mix things up. I took the blocks off the wall from top to bottom in the rows from upper right to lower left. I pinned a number on them to indicate which row they were and then managed to sew them together. (I only put one row on upside down and caught it soon enough that I didn't do any more seam ripping than necessary.)

I put the completed top back on the wall and decided it was too narrow. I'm aiming for a single (I think that's the same as a "twin") and it was less than 60" wide. I decided to add half blocks to fill in the spaces on the right and left sides. This meant putting together more blocks.

I pulled out the fabrics and put together five more diamonds. I cut them in half to use one half on each side and cut two of the halves in half again for the four corners.

The quilt police would say that you can never make a block and cut in half to use like this because it doesn't allow for a 1/4" seam allowance. So you're supposed to make a partial block just a little bigger than a half block. With this pattern, I just don't have to be that fussy. The points of the main diamonds (the inner ones of each block) won't be cut off and no one will care that the border is cut off 1/4". Now that I've proven to the quilt police I know what they know, we can move on.

On the first side, I tried to "insert" the half diamonds with Y seams and without taking out any of the existing seams. I got it done, but it's not very pretty. On the other side, I did the extra step of undoing a couple inches of the existing seam before adding the new half block. It did take a little more time but it was less fiddly.

I thought about ironing all the seams between the blocks open so that they would be nice and flat and no block would be more dominant than another, but I ended up pressing to one side and furling the seams.

You can see the intersection circled in white. Sorry to keep showing it, but I still love the effect of this method! And since each block ends up with two seams pressed in and two pressed out, none of them dominate.

While I was inserting the blocks, I discovered that one of my border strips had a little cut in it. The fabric was cut just about to the seam.

This is probably an "overcut" from cutting a previous piece that I missed when cutting this strip. I decided to mend it instead of replace it, and just stitched it to the other piece of fabric in the seam allowance. Now there won't be any pressure on the cut and it shouldn't tear any further. The seam allowance will be slightly thicker but it won't be noticeable.

Once the top was together, I trimmed the points from the edges and sewed a line of stay stitching around the outside.

This helps prevent the quilt from stretching at the edges, helps to lock any seams that weren't backstitched to prevent them from popping open, and keeps seam allowances in place as you layer the quilt.

And then I could call the quilt top done:

I think I know how I would quilt this and (unfortunately) it isn't really suited to using a longarm machine, so that means quilting it on my home machine. But I am also considering having it done by a professional longarmer with a computerized machine. I have an idea how I would like that done as well so I'm going to get a quote.

So how long does it take to make a quilt? I bought the fabric over a couple days in 2014. I cut and made the blocks in a week in 2015. And I pieced the quilt in a week in 2018. So that's four years for a quilt top, right? :)

While I was adding the half blocks on the sides, I stitched some scraps together in between each seam. (This saves you from pulling out a few inches of thread at the end of every seam and saves you from cutting those ends at the beginning of each seam.)

I ended up with a 10" block and some units that can be used in a future block or other project. Slab blocks like this are so much fun. Sticking with one colour at a time makes them surprisingly versatile, but I have no particular plans for this one.