In Which I Think I'm Clever

I've been working on my Lace Coat pretty steady. I have picked up 197 stitches along the straight edge of the hem band and started what the designer calls the "day lilies pattern." (I'm half way through the second repeat, and it's starting to look like it could become a skirt, rather than like a long odd scarf.)

In the pattern, the day lilies pattern is written out and not charted. It has a 16-stitch repeat, so it's not too bad to read the pattern the "long way" but I do prefer charts. I decided it was worth the effort to make my own chart in Excel. I've done this before and used my own symbols for the stitches, but it's easier to use standard symbols that I'm used to.

Enter this amazing knitting font which has knitting symbols instead of letters (and includes a handy chart so you can know which keys to press). I downloaded the font, made a chart, and then saved the chart as a pdf so I could load it onto my new Kindle Fire. (I'm very excited about that part!)

But I took it one step further...I actually saved several copies of the chart where a different row is highlighted on each one. That way I could not only more easily read the stitches, but I could also keep track of which row I'm doing. When I restart the Kindle, I can tell which pdf file I last used and that will tell me which one I need to do next. Here's a shot of the chart for row 3:

I only made charts for the odd numbered rows since almost
all the even ones are just purling. I didn't include a complete key
because I'm familiar with most of the symbols. I just added a
reminder above the chart for the symbols I may not remember.

So now I not only have charted the pattern, but I have made it easier to read, portable, and provided a way to keep track of what row I'm on. Clever, no?

Lace Hem Band Competed

Stage one is complete:

The lace hem band is finished. I gave the piece a "half block" (I wet it but didn't bother to pin it out.) I just wanted a rough idea of what it would look like and of the size. It measures a little long but it's in the ballpark. I expect to lose length when I properly pin it and stretch it widthwise.

I like the leaf pattern and leafy ruffle. It might sound funny to say that when I've seen the coat and already know I like it. But it's easy to see the whole in a picture in a magazine without seeing all the individual parts. Like, for instance, I don't actually like the extra half leaf at the beginning of the border (bottom-most right leaf in picture above). I can tell already that that part is not going to hang right no matter how well I block the ruffle. But it's at the very beginning, so there's not much I can do about it.

Here's a closer up:

The part on the top of the photo will have to get some carefully detailed blocking. I won't be able to lay it flat so I think I'll have to do it bit by bit on the ironing board. We'll see how that goes...but that's months off! I don't have to worry about it right now.

I had some trouble casting off the lace loosely enough until I remembered reading about some kind of yarn over bind off. I didn't bother going to look for it online, but just experimented on my own. This is what I came up with:

You can also do a yarn over on every other stitch only, and the tension will be between a regular bind off and doing the yarn over on every stitch. I think doing it every stitch would be too loose for most applications. You may recall that I started this lace strip with a provisional cast on so I could go back and bind off the stitches later. There would be no way to cast on stitches as evenly and be able to adjust the tension without taking out a lot of knitting. (If the cast off isn't right you can easily take it out and adjust it--I've did it several times in this case.)

Up next? I have to pick up stitches along the straight edge and start knitting up the skirt. But I'm waiting for the right size needles to arrive. (Remember I ordered 40 cm length instead of 40 inches?) I ordered new ones a few days ago, so they should here soon!

Citrus Slippers

They are finished!

New slippers for my feet.

I find the lemon and lime colours of Phentex very cheery.

Yes, I write about new slippers relatively often. Unfortunately they are a "consumable" knit. I wear them often and wear them out!

The design is one that my grandmother use to do from memory. I found a Finish pattern and managed to figure it out and write up an English version.

Last time I needed slippers, my sister kindly made a pair from the same pattern. But this time I thought I should take care of my own feet!

Project Stats
Started: 6 Jan '13
Finished: 19 Jan '13
Pattern: 8 square sock by Käspaikka
Materials: Phentex Slipper and Craft yarn (yellow and grass) $5.38

Progress Report (Day 2)

After writing my last progress report, I worked on the bulky cable vest. I figured out the length issue and ended up taking out a few rows of the front, but not much. I joined the back and front at the shoulder seam with a three needle bind off.

Once they were joined, I continued knitting the two side cables, attaching them to the stitches I left live on the back neck edge. At the end of each row I knit or purled the last stitch together with the stitch from the back. It got pretty awkward at the center back, but still manageable.

Once all the stitches were picked up, I grafted the two ends of the cable trim together. It happened to fall on a cable row so I exchanged the position of the stitches on the needle and then grafted as normal.

It's too bad it looks a little clunky where the cable twist changes direction at the center back, but there's not much you can do about that if you want the twists to be a mirror image on the front.

Once that was done, I picked up stitches around the armhole, but didn't start to knit them.

I paused here because I want to try it on and see how it's going. And that also pretty much finished my night. Football was done and it was time for some sleep. (BTW, it looks like I will have plenty of yarn for this. You don't need to stay up at night worrying about it any longer. Not that I was...)

The next day in the car, I started with the lace coat. I started chart 2 and got the first repeat done (24 rows):

You can see the left side is "longer" than the right side.
It will form the ruffle at the hem.

Only nine more repeats to go!

Right now it's a lot of work because I am consulting the chart on almost every stitch. But after the first repeat of the chart, I'm starting to recognize some patterns. It's sort of like starting to write. At first someone tells you to make a line from top to bottom and then to draw a circle beside it but just touching the line. You follow the instructions piece by piece, and when you're done you look at what you made and recognize a "b." But with a little repetition, you start to recognize that the "b" falls into a whole family of letters with circles and lines, like "a," "d," "p," and even "g" if you just add a hook at the bottom. That's about where I am with this pattern, just recognizing the patterns between the different parts.

Once the pattern is learned, it's easier to knit without constantly looking at the chart. You can "read" your knitting and know what comes next. You can see that you're working on the leaf, and what part of it you're on. Do you need to make it bigger or smaller at that point?, etc.

I'm not sure I'll get to the point where I will be able to knit this lace pattern without the chart, but I can already tell that it's getting easier. For now, it will not be something to work on during football games, I can tell you that!

About the time I finished the chart, it was getting dark enough to make chart reading more difficult, so I pulled out the sock I had packed. In the hotel the night before, I had tried it on and decided it was long enough to start the cuff. I cut the black/white yarn, joined the red, and knit one row (so there wouldn't be any colour blips) to set it up for the next day.

In the car I started a 1x1 rib and got this much done before my hands were tired from the small needle work and it was getting dark enough to make it hard to see the stitches.

Do you think I made it long enough?? Ha ha. It really shortens a lot when I put it on because it has to stretch around my calves. I'll do a good 3" of cuff, I think, and they will be just right for knee socks. (That's 3" when I'm wearing them. That might be as much as 5" unstretched.)

Then I still did not stop knitting because I don't need to see much to work on the bias scarf, so I did a few sections of that. Then it was truly dark and my hands/body were tired enough to want to stop. Troy drove the whole way again, so I had plenty of time to knit, knit, knit!

Once home, unpacked, and settled in for some Downton Abbey, I picked up a new project. While in Guelph, we stopped at Len's Mill, a general merchandise store that carries tonnes of yarn and fabric. I walked through the aisles and couldn't believe the sheer quantity of yarn that they carried! A lot of it was acrylic so fortunately I could just skim those aisles.

I did pick up a couple balls of crochet cotton, and then I saw the Phentex. What a blast from the past. I've never seen it in the States, but it's a completely horrible fake yarn that feels a lot like plastic twine. But it is what we all used for slippers growing up. And many still do. Well, my own slippers have been taken down by the latest round of home improvement, so I picked up a couple of bright cheery colours and started on a replacement pair:

Progress Report (Day 1)

Ok, so I had a day of traveling in the car--just what did I get done of my ambitious packing?

1. I finished the front of the bulky cashmere vest:

I knit both the left and right sides at the same time (with two different balls). But when I was supposed to have 15 stitches on each side, I had 15 on one and 17 on the other. I worked out that I hadn't bound off two stitches at the armhole--right back where I started the day!!

So I ripped back the one side and did it right. Fortunately it was only about 20 minutes of extra knitting. It's a little ironic that part of why I do both halves at once is so that I can do the shaping at the same time and get it to match...

I didn't like how the cables that run along the neckline looked in the pattern so I changed them somewhat.

Instead of crossing every 4th row, I did it every 6th row. I like it better than the pattern, but I think it may have even worked to do it every 8th row. I don't want it to look much more twisted than the main braid cable. The two side cables will continue around the back and form the back neckline. It's a neat design feature.

I got to the point where I couldn't be sure whether the front was the same height as the back. It was impossible to measure accurately while in the car. I think I may have knit the front too long so I'll have to figure that out tonight so I can continue tomorrow when I'm back in the car.

2. Once I decided to put that away, I pulled out the lace coat. I decided to start with a provisional cast on over a long end:

Once I'm done this section, I'll pull out the tail (picking up the stitches) and cast off with the tail. As stated in a recent post, it's easier to get a neater and correctly-tensioned cast off than cast on. It's not really a lot of extra work either, so totally worth it.

I discovered that I ordered the wrong size needles. The "size" is correct (diameter), but I was looking for a 40" cable needle so that I could use the magic loop method on the smaller sections of the coat (like sleeves). Well, 16" cable needles are apparently 40 cm. So when I saw "40" and ordered them, I got about the shortest needle you can get. And I wanted the longest. The good news is that I can use them for some of the sections (like the hem band, which is the first piece). Of course the bad news is that I will still have to buy the longer needles.

The other good news is that these needles are more comfortable than the interchangeable set that I have. I've never like circular needles, but maybe I just don't have the right set yet.

The knitting itself went pretty well and I completed the first chart (24 rows) before it got too dark to comfortably read the chart:

The yarn doesn't really feel like much in the strand, but it sure is lovely to knit with.

3. Once I put the lace away, I pulled out the no-thinking-needed shawl and did a couple of sections before we arrived.

Well, three out of four projects worked on and I still have the trip home tomorrow (and time tonight while watching some football playoffs). Apparently my packing wasn't so out of line after all!

Ready to Go!

I wasn't particularly excited about a car trip this weekend (although I wanted to go), and then I remembered...car knitting!! So tonight I set out to be prepared.

First, I wound two balls of lace for the lace coat:

Don't tell anyone, but I'm not going to swatch. I'm usually close on gauge and to do an accurate gauge swatch would require so many stitches, I may as well get the coat started. I'm not afraid of ripping back if it becomes necessary.

I wound two balls because part of the pattern needs to be worked double stranded. I decided if there is any colour difference between balls it would be safer to work with two balls than to work from two ends of the same ball and then have a sudden change when I had to start a new ball.

I've printed the corrected charts from the Vogue Knitting website (advantage of not being the first one to knit the pattern), have my new cable needles, and should be set to go.

I also have my vest ready for some new work. I have ripped out and reknit the back. It is looking much better:

Next I'll continue the front. Since it has a single fairly simple cable, I expect it will go pretty quickly and hopefully without incident. Of course, there's always more shaping with the neckline in the front, but nothing that should slow me down.

And for the times when I don't feel up to thinking, charting, or keeping track of where I am in a pattern, I can continue on my bias scarf:

It's coming along nicely. I wondered if the gauge is a little tight, but I think blocking will loosen it up enough. If not, it's alright.

And just in case, I'll throw in these socks too. (You never know.)

Symptoms of Startitis

On Christmas day, with a serious case of startitis and not wanting to wait for the yarn for my Squam sweater, I started a bulky vest from Vogue Knitting I had been eyeing for a while. The original was done with Rowan Big Wool which I have used for a couple projects and is nice, but doesn't come in the colours I was thinking of and would have been a little pricey.

So instead, I decided it was time to ravel my ultimate find at Goodwill--a bulky cashmere sweater.

I originally bought it for the wool, but since it fit well enough I wore it for a couple winters. The wool is soft and cushy and warm, but the high collar was a little irritating to my neck. So I knew I couldn't make it into something worn against the skin.

I also was kind of waiting for the perfect something to come along. Because, really, the sweater it was already knit into was pretty good as it was. But at some point on December 22, I decided long enough was long enough and started raveling...

I got about 550 grams of bulky weight cashmere and I have to say this was one of the most uneventful ravels I've ever done. I don't think I lost one inch of the yarn, and that is very rare. I was able to separate the pieces, then undo the ends at the end of the cast off, undo the cast off, and then continue all the way down to the beginning of the cast on. It was incredible.

The next day I started a swatch to try and get the gauge specified in the pattern. The needle size recommended in the pattern didn't quite work. I went up two sizes, then down one and none of them were quite right. (The last option fit the gauge but the look and feel of it was too loose.)

Then I realized that since I was planning to knit the pattern in the round, most of it would be purled and I was swatching by knitting and purling. Although I haven't noticed a big difference in my own knitting, there is often is a difference in the knit tension and purl tension. (Some people exhibit such a wide difference that they use a different size needle for purl stitches than knit stitches. Of course this only works for stocking stitch, but that's a pretty big percentage of knitting.)

So I started a new section of the swatch and only purled. At the end of the row, I would slide the stitches to the other end, leave a long loop at the back and purl the next row.

So I got a stocking stitch pattern (or reverse stocking stitch pattern, depending on the side) by only purling, which is what I was going to have to do on the pattern. And guess what...with the needles suggested by the pattern, I got gauge and the fabric felt right.

While I was knitting the swatch, I debated about the colour. I've always been a bit conflicted about it. Nice pale blue, or horrible off colour? I don't know. Troy saw me knitting the swatch and, without any prompting on my part, said, "You need to dye that a new colour." That settled it--I had to at least consider what I could  do.

The only option I was really considering was dying with Koolaid (yes, that's a real option). People are loving it because Koolaid is readily available, food safe, and needs no additional colour affixer (or whatever it's called). I considered it for quite a while and asked about it on Ravelry, but eventually decided to just knit the vest. I was never going to risk this bulky cashmere, and I didn't want to wait until I had learned on other samples. I had serious doubts that I could dye the whole lot the same and I really didn't want the vest to be made out of a multi-colour or multi-toned yarn. There is the option of dying the entire garment once it's knit, but realistically, that has even less of a chance of success. So I will be wearing icky blue and hoping for the best.

I've noticed lately that my cast offs are a lot better than my cast ons--it's easier to get the tension right for one thing--so I decided to start with a provisional cast on, and to finish the bottom of the garment later.

I used the crochet cast on and knit up from there.

Using a contrasting yarn not only reserves more cashmere for the garment (it's going to be close according to  the yarn requirements listed by the pattern), but also makes it easier to pick the crocheted part out when you're ready to knit those stitches again. I'm kicking around a couple ideas for how to finish the bottom edge.  (I can simply do a cast off row, knit a couple rows of rib and cast off, or apply another type of edging.) A lot will depend on how much yarn I have available.

The pattern is done from the bottom up with the front and back in separate pieces. I decided to do it in the round (hence all the purling). This also helped with the sizing because the medium size was just a touch small. By doing it in the round, four stitches will not get caught up in seams and with a gauge of 10 stitches/4" that will add more than an inch. Just what I needed.

With such bulky yarn, it was quick work to make it up to the armholes. Here's the back:

Here's the front:

The designer incorporated a nice touch that I had just learned about recently. Most cable patterns have you cast on the number of stitches you will need for the pattern and then the cast on edge is all stretched out because the cable itself pulls in where the stitches cross. The designer overcame this by casting on fewer stitches under the cable and then having you increase on the third row. It worked great. I'm glad to see Vogue did not edit this part of the pattern out. Sometimes I think things like this get taken out because people will think the pattern is "too hard" but I was happy to see it. (I might have forgotten to add it in myself--certainly I would have the first time through.)

Yesterday I finished the back up to the shoulder shaping. When I laid it all out to admire my work and see how it was going, I found a mistake. Gah!! Can you find it?

When you're ready to give up, you can look at the next picture...

The red arrows indicate the problem. The yellow arrows indicate the same part of the pattern one repeat before. I didn't cross my cables when I should have. And yes, you can say it looks pretty enough, but you lose the illusion of two intertwined ropes. So tonight when I get done writing this, I will have to rip it out, figure out what row I'm on and knit it back up.

It shouldn't take too long...